More help please???

[Adam1977]

OK have done what has been suggested, now having a few different problems now, can some please help???

1. When I play Chrono Trigger on SNES or Alex Kidd on Sega Master games always go to the emulator and not the game. Then I have to open rom from the emulator. How do I fix???

2.When exit the emulator above the screen goes very small, not at what it was before I launched game. I think it at 800 x 600 before I lauched game it must be half that when you exit???

3.When Trying to play a NES emulator game like Mike Tysons punchout it starts to load, the small screen appears with message saying Rockness could not find Mike Tyson Punch out. (Sorry,but the file Mike Tyson's Punch-Out!! (U) (PRG0) [!].zip was not found)- error message

Below is the log for these above

06:06:28 PM | HyperSpin Started
06:06:28 PM | Startup Program Unvavailable
06:06:28 PM | Menu mode is multi
06:06:28 PM | Menu.xml found
06:06:28 PM | Entering windowed mode
06:06:28 PM | Main Menu.xml loaded
06:06:28 PM | Loading wheel images
06:06:28 PM | Entering Menu
06:06:43 PM | Menu.xml found
06:06:43 PM | Nintendo Entertainment System.xml loaded
06:06:43 PM | Loading wheel images
06:06:44 PM | Entering Menu
06:08:09 PM | Excecutable is RockNESX.exe
06:08:09 PM | Running in normal rom mode
06:08:09 PM | Executable Found
06:08:09 PM | Rom Found
06:08:09 PM | Attempting to launch
06:08:09 PM | Pausing Animations
06:08:09 PM | Launching file
06:08:09 PM | Command Line is: "C:\Emulators\NES\RockNESX.exe" Mike Tyson's Punch-Out!! (U) (PRG0) [!].zip
06:08:29 PM | Menu.xml found
06:08:29 PM | Main Menu.xml loaded
06:08:29 PM | Loading wheel images
06:08:30 PM | Entering Menu
06:08:37 PM | Menu.xml found
06:08:37 PM | Super Nintendo Entertainment System.xml loaded
06:08:37 PM | Loading wheel images
06:08:38 PM | Entering Menu
06:08:42 PM | Excecutable is Snes9XW.exe
06:08:42 PM | Running in normal rom mode
06:08:42 PM | Executable Found
06:08:42 PM | Rom Found
06:08:42 PM | Attempting to launch
06:08:42 PM | Pausing Animations
06:08:42 PM | Launching file
06:08:42 PM | Command Line is: "C:\Emulators\Snes9x\Snes9XW.exe" Chrono Trigger.zip
06:09:29 PM | Menu.xml found
06:09:30 PM | Main Menu.xml loaded
06:09:30 PM | Loading wheel images
06:09:30 PM | Entering Menu
06:09:38 PM | Menu.xml found
06:09:38 PM | Sega Master System.xml loaded
06:09:38 PM | Loading wheel images
06:09:38 PM | Entering Menu
06:09:44 PM | Excecutable is Fusion.exe
06:09:44 PM | Running in normal rom mode
06:09:44 PM | Executable Found
06:09:44 PM | Rom Found
06:09:44 PM | Attempting to launch
06:09:44 PM | Pausing Animations
06:09:45 PM | Launching file
06:09:45 PM | Command Line is: "C:\KegaFusion\Fusion.exe" Alex Kidd in Miracle World.zip
06:11:33 PM | Menu.xml found
06:11:33 PM | Main Menu.xml loaded
06:11:33 PM | Loading wheel images
06:11:34 PM | Entering Menu
06:11:39 PM | Exiting HyperSpin
06:11:39 PM | Exit Program Unvavailable

4. Is there a way to just press a alphabetically key on keyboard, for the wheels to go to that section instead of scrolling though the wheel .Can this function be setup (eg. press d goes to goes to games starting with d)

5. Is there a fix for the jukebox error that appears?

6.How to change music thats playing when you go to jukebox on main menu?????

7.What I mean by this future pinball problem is when you select a pinball machine lets say the simpsons the video file is playing in top half of screen, while in bottom half the background image is still displayed and on the right of screen is the spinning wheel???? How do I fix???

Can someone please help??????????????????

[Zinger19]

well I think for question 1 u need to change ur ini settings for ur emulators to nogui . As for number 2, is ur settings for the emuators the same resolution as ur computer? Try nestopia instead of rockness. No there is no way to skip alphabeticly yet. I don't have jukebox so I can't help u there and I have no idea about future pinball.

[Adam1977]

How do I change the ini settings for emulators to no gui. Which file to edit and where is it located which dir?? I have done my music config for the juke box and no need for that answer anymore. Just one more answer to add:

8. Why does no settings appear in the settings tab in hyperHQ??

Also if anybody else can help me with my other questions as well I would appreciate it, thanks

[Zinger19]

Hyper Hq is unfinished. Bill has rewriting a new program. The ini file will be in the same folder as your emulator. Like I have ZSNESW for my SNES emulators and the file you need to open will be the config file actually. It will be zsnesw cfg

[Adam1977]

Thank you for the help so far I will try it sortly.

[Adam1977]

Found the sega (kega) settings or fusion.ini file, what excactly am I looking for and what to edit??Is this the right file, I looking though my SNES file and cant find ZSNES.cfg. file to edit??

ForceFullScreen32=0
DebugFlags=0,0,2,2

;---------------------------------
; Sound Compatibility Options
;---------------------------------

ForceSWBuffer=1

;---------------------------------
; SG1000/SC3000/SMS/GG Specific
;---------------------------------

LastSMSROM=C:\Emulators\Sega Master System\Roms\Alex Kidd in Miracle World.zip
LastGGROM=C:\KegaFusion\
SMSUSABIOS=
SMSJAPBIOS=
SMSEURBIOS=
GGBIOS=
SxMFiles=C:\KegaFusion
SMSStateFiles=C:\KegaFusion
SMSPatchFiles=C:\KegaFusion
GGPatchFiles=C:\KegaFusion
SMSSpriteLimitDisable=0
YM2413Disable=0
SMSBIOSDisable=0
SMSBorderDisable=0
GameGearZoom=0

;---------------------------------
; MegaDrive/Genesis Specific
;---------------------------------

LastGenesisROM=C:\KegaFusion\
SRMFiles=C:\KegaFusion
StateFiles=C:\KegaFusion
PatchFiles=C:\KegaFusion
GenesisBIOS=
AutoChecksums=0
GenBorderDisable=0

;---------------------------------
; Mega CD/Sega CD Specific
;---------------------------------

LastSegaCDImage=C:\KegaFusion\
SCDUSABIOS=C:\SegaCDBIOS\us_scd1_9210.bin
SCDJAPBIOS=C:\SegaCDBIOS\jp_mcd1_9111.bin
SCDEURBIOS=C:\SegaCDBIOS\eu_mcd1_9210.bin
DefaultDrive=X:X:X None
CDReadAhead=4
CD+GMode=0
ForceASPI=0
BRMFiles=C:\KegaFusion
BRMPerGame=1
LEDEnabled=1
PerfectSync=0

;---------------------------------
; 32X Specific
;---------------------------------

32XM68KBIOS=c:\32XBios\32X_G_BIOS.bin
32XMSH2BIOS=c:\32XBios\32X_M_BIOS.bin
32XSSH2BIOS=c:\32XBios\32X_S_BIOS.bin
Disable32X=0

;---------------------------------
; Expert Options [DANGER! RTFM!]
;---------------------------------

RefreshRate60Hz=60
RefreshRate50Hz=100
UseExpertModes=0
UseAutoSwitching=0
MinSwitchDelay=100
Mode256x240=640,480,60,100,640,480
Mode256x480=640,480,60,100,640,480
Mode320x240=640,480,60,100,640,480
Mode320x480=640,480,60,100,640,480

;---------------------------------
; File History
;---------------------------------

FileHistory0=C:\Emulators\Sega Master System\Roms\Alex Kidd in Miracle World.zip
FileHistory1=Alex
FileHistory2=
FileHistory3=
FileHistory4=
FileHistory5=
FileHistory6=
FileHistory7=
FileHistory8=
FileHistory9=
FileHistoryA=
FileHistoryB=
FileHistoryC=
FileHistoryD=
FileHistoryE=
FileHistoryF=
ShortenHistoryNames=0

;---------------------------------
; Netplay Settings
;---------------------------------

NetplayName=
NetplayServer=
NetplayPlayers=2
NetplayLatency=6
NetplayBandwidth=1

;---------------------------------
; General Settings
;---------------------------------

WAVFilesPath=C:\KegaFusion\*.wav
VGMFilesPath=C:\KegaFusion\*.vgm
ScreenshotPath=C:\KegaFusion
ScreenshotType=0
CurrentCountry=0
CountryAutoDetect=1
CountryOrder=0
CurrentWaveFormat=2
SoundOverdrive=0
SoundSuperHQ=1
SoundDisabled=0
CurrentRenderMode=1
FullScreen=0
DWindowXPos=22,0,0,0
DWindowYPos=29,0,0,0
DWindowSize=224,1,128,2
DResolution=224,1,128,2
DRenderMode=0
DFixedAspect=1
DFixedZoom=0
DFiltered=1
DScanlines=4
VSyncEnabled=0
Player1Keys=200,208,203,205,30,31,32,28,44,45,46,4 7,0,0,0,0
Player1bKeys=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Player1cKeys=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Player1dKeys=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Player2Keys=72,80,75,77,36,37,38,157,49,50,51,52,0 ,0,0,0
Player2bKeys=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Player2cKeys=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Player2dKeys=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Player1Buttons=32,33,34,35,0,1,2,3,4,5,6,7,8,9,10, 11
Player1bButtons=32,33,34,35,0,1,2,3,4,5,6,7,8,9,10 ,11
Player1cButtons=32,33,34,35,0,1,2,3,4,5,6,7,8,9,10 ,11
Player1dButtons=32,33,34,35,0,1,2,3,4,5,6,7,8,9,10 ,11
Player2Buttons=32,33,34,35,0,1,2,3,4,5,6,7,8,9,10, 11
Player2bButtons=32,33,34,35,0,1,2,3,4,5,6,7,8,9,10 ,11
Player2cButtons=32,33,34,35,0,1,2,3,4,5,6,7,8,9,10 ,11
Player2dButtons=32,33,34,35,0,1,2,3,4,5,6,7,8,9,10 ,11
Joystick1Type=1
Joystick1bType=1
Joystick1cType=1
Joystick1dType=1
Joystick2Type=1
Joystick2bType=1
Joystick2cType=1
Joystick2dType=1
Joystick1Using=0
Joystick1bUsing=0
Joystick1cUsing=0
Joystick1dUsing=0
Joystick2Using=0
Joystick2bUsing=0
Joystick2cUsing=0
Joystick2dUsing=0
MultiTapType=0
InvertMouse=0
LightgunCursor=0
FPSEnabled=1
CurrentRenderPlugin=0
AllowSleeping=0
AlternateTiming=0
DisableShortcuts=0
ThreadPriority=0
StaticDisabled=0
Brighten=0
VGM_Version=16,1

What do I have to do???Please help thank you

[Zinger19]

The Config file for ZSNESW will say ZSNESW and will have CFG underneath. It will like you won't be able to edit it until you click on it and it will as you for the appropriate file opener thing and then you will choose your own and choose the text editor of your choice. As for Fusion I'll have to get back to you that tomorrow if no one else answers. I can't remember at the moment and I have to leave for work.

[Zinger19]

FullScreen=0 change that 0 to a 1

[Adam1977]

Changed to a 1, what about the no gui, where do that go??

[Goalies Rule]

Hey Adam, just to add in a few things. Be sure that you have this setting in your future pinball.ini. Its under the settings folder. This will make sure the wheel is underneath your video.

[wheel]
style = pin

For configuring other emulators besides MAME, heres what I use. ZSNESW for SNES, Nestopia for NES, and Sega Fusion for Genesis and 32x. No sega cd or other emu's for me right now. Be sure to open these up and fully configure them outside of hyperspin. then, use hyperhq to set your paths and you should be good to go

[Goalies Rule]

Ok, after better reading, you are using fusion. Open up the program outside of Hyperpin and configure it. It has a gui with options you can use. Ini's can be confusing

[BadBoyBill]

Hi welcome to the forum, I just have one small suggestion, you have made 3 seperate threads with all the same questions, please keep all this to one thread, its harder to help when you see the same questions split accriss multiple threads.

[Adam1977]

Ok The wheel is down the bottom but it takes up half the screen botttom half and top half is pinball machine. Is is right below??

exe info]
path = C:\Future Pinball\
rompath = C:\Future Pinball\Tables\
userompath = false
exe = Future Pinball.exe
romextension = fpt
parameters = /play /exit
pcgame = false
pcgameextension =
winstate = HIDDEN

[video defaults]
width = 1024
height = 768
x = 512
y = belowwheel es
rotation = 0
animation_time = .3
animation_type = fade
animation_start = none
border_color = 0x000000
border_size = 12
forceaspect = horizontal
belowwheel = false

[sounds]
game_sounds = true
wheel_click = true

[artwork1 defaults]
x = 512
y = 160
rotation = 0
animation_time = .5
animation_type = ease
animation_start = top
animation_rest = none

[artwork2 defaults]
x = 200
y = 500
rotation = 0
animation_time = .5
animation_type = ease
animation_start = right
animation_rest = none

[artwork3 defaults]
x = 200
y = 500
rotation = 0
animation_time = .5
animation_type = ease
animation_start = left
animation_rest = none

[artwork4 defaults]
x = 512
y = 500
rotation = 0
animation_time = .5
animation_type = ease
animation_start = none
animation_rest = none

[Special Art A]
default = yes
active = yes
x = 512
y = 720
in = .4
out = .4
length = 3
delay = .1
type = normal
start = bottom

[Special Art B]
default = yes
active = yes
x = 512
y = 740
in = .4
out = .4
length = 3
delay = .1
type = fade
start = none

[Game Text]
game_text_active = false
show_year = true
show_manf = true
show_description = true
text_color1 = 0xffffff
text_color2 = 0x0099cc
stroke_color = 0x000000
text_font = Style1
text1_textsize = 26
text1_strokesize = 7
text1_x = 32
text1_y = 610
text2_textsize = 36
text2_strokesize = 8
text2_x = 30
text2_y = 640

[Genre Screen]
allgames_title = All Games
text_color = 0x000000
text_x = 150
text_y = 200
stroke_color = 0xffffff
stroke_size = 7

[wheel]
style = pin

The wheel seems very big, bottom half of screen and you cant see much of the pinball machine in top half of screen??
What is meant by setting up gui, I opened Kega outside of hyperspin but could not find any options for it??
Thank you

[Goalies Rule]

Does your Future Pinball look like this? Check the last video on the page

http://www.hyperspin-fe.com/index.php?pageid=previews

As far as Fusion goes, just go click on fusion.exe. It will pull up the program and should have a screen of snow. All of the options will be across the top of the screen

[Adam1977]

No my screen is split is half or thats what it looks like to me can see pinball machine but only the bottom half of the machine in top half of my screen and the wheel is in bottom half of screen, but the wheel now is at the bottom of screen at least inside of being at the right hand side of screen. Is it possible to take picture of it to post or show?? Help please??
Still have to run fusion sega emulator etc so will try that shortly, still having problems with question 5: jukebox error has anyone fixed this yet??
And this pinball menu error??
Fusion,sega emulator error??

[BadBoyBill]

Your pinball ini is messed up

x = 512
y = belowwheel es
rotation = 0

should be

x = 512
y = 384
belowwheel = true
rotation = 0

Also it looks like your running an old version of HS, upgrade to the lates to add missing settings to the ini file.

[Goalies Rule]

Yeah, take a screenshot of your pinball menu. Pull it up, and hit the print screen button. From there, open up MS paint and paste the picture. Save it somewhere. Then in your next post, you can attach the screenshot.

In your future pinball.ini, change to "exe = Future Pinball.exe /open"

Also, post your sega genesis.ini thats in the settings folder. If you select a game and it doesn't open

Edit = Nevermind about the screenshot if that fixes it

[Adam1977]

That fixed the piball menu problem thank you, thank you
Below is my Sega master and SNES ini files for my setting folder and a copy of a log when trying to play Alex Kidd on sega master doesnt say error, what is wrong?? The games start to load then load to the emulators instead of games??Get the snowy screen??

Sega Master

[exe info]
path = C:\KegaFusion\
rompath = C:\Emulators\Sega Master System\Roms\
userompath = false
exe = Fusion.exe
romextension = zip
parameters =
pcgame = false
pcgameextension =
winstate = NORMAL

SNES:

[exe info]
path = C:\Emulators\Snes9x\
rompath = C:\Emulators\Snes9x\Roms\
userompath = false
exe = Snes9XW.exe
romextension = zip
parameters =
pcgame = false
pcgameextension =
winstate = NORMAL

Log:

1:48:33 AM | HyperSpin Started
01:48:33 AM | Startup Program Unvavailable
01:48:33 AM | Menu mode is multi
01:48:33 AM | Menu.xml found
01:48:33 AM | Entering windowed mode
01:48:33 AM | Main Menu.xml loaded
01:48:33 AM | Loading wheel images
01:48:34 AM | Entering Menu
01:48:59 AM | Menu.xml found
01:49:00 AM | Sega Master System.xml loaded
01:49:00 AM | Loading wheel images
01:49:00 AM | Entering Menu
01:49:05 AM | Excecutable is Fusion.exe
01:49:05 AM | Running in normal rom mode
01:49:05 AM | Executable Found
01:49:05 AM | Rom Found
01:49:05 AM | Attempting to launch
01:49:05 AM | Pausing Animations
01:49:06 AM | Launching file
01:49:06 AM | Command Line is: "C:\KegaFusion\Fusion.exe" Alex Kidd in Miracle World.zip
01:50:03 AM | Menu.xml found
01:50:03 AM | Main Menu.xml loaded
01:50:03 AM | Loading wheel images
01:50:04 AM | Entering Menu
01:50:13 AM | Exiting HyperSpin
01:50:13 AM | Exit Program Unvavailable


Can somebody help please!??

[Goalies Rule]

Change "userompath = false" to true on both snes and sega

[Adam1977]

Sega master system game works but the SNES Chrono Trigger still does not work still goes to emulator instead of game??

SNES INI
[exe info]
path = C:\Emulators\Snes9x\
rompath = C:\Emulators\Snes9x\Roms\
userompath = true
exe = Snes9XW.exe
romextension = zip
parameters =
pcgame = false
pcgameextension =
winstate = NORMAL
hyperlaunch = true

Log:

18:07 AM | HyperSpin Started
02:18:07 AM | Startup Program Unvavailable
02:18:07 AM | Menu mode is multi
02:18:07 AM | Menu.xml found
02:18:07 AM | Entering windowed mode
02:18:08 AM | Main Menu.xml loaded
02:18:08 AM | Loading wheel images
02:18:08 AM | Entering Menu
02:19:30 AM | Menu.xml found
02:19:30 AM | Super Nintendo Entertainment System.xml loaded
02:19:30 AM | Loading wheel images
02:19:31 AM | Entering Menu
02:19:51 AM | Excecutable is Snes9XW.exe
02:19:51 AM | Running in normal rom mode
02:19:51 AM | Executable Found
02:19:51 AM | Rom Found
02:19:51 AM | Attempting to launch
02:19:51 AM | Pausing Animations
02:19:52 AM | Launching file
02:19:52 AM | Command Line is: "C:\Emulators\Snes9x\Snes9XW.exe" "C:\Emulators\Snes9x\Roms\Chrono Trigger.zip"
02:20:38 AM | Menu.xml found
02:20:38 AM | Main Menu.xml loaded
02:20:38 AM | Loading wheel images
02:20:39 AM | Entering Menu
02:20:45 AM | Exiting HyperSpin
02:20:45 AM | Exit Program Unvavailable

Also what screen resolution do I set for outside of hyperspin so that the games run in full screen but dont look funny or en-larged??

[Goalies Rule]

Well, the screen resolution totally depends on your monitor. Under snes9x, you should be able to set it to fullscreen yes or something along those lines.

The chrono trigger thing is messed though because usually they end in (USA)

[Adam1977]

How do I change the command line?. the file it looks for to run the game. What file is it again?. Eg. command line for SNES

[Goalies Rule]

Well the command line should be fine. What you want to do is double check the super nintendo entertainment system.xml. It should look like this

- <game name="3 Ninjas Kick Back (USA)">
<description>3 Ninjas Kick Back</description>
<crc />
<manufacturer />
<year />
<genre />
</game>

be sure the game name=, EXACTLY matches the name of your file minus the ".zip". So my 3 Ninjas Kick Back (USA).zip would be game name="3 Ninjas Kick Back (USA)"

[Adam1977]

I will check my xml and post what I find shortly thanks for the help, to everyone who has helped me so far thank you

[Adam1977]

Still loading to emulator and not game
Checked my system XML file ofr SNES I cant see anything wrong, here it is below:
<menu>
<game name="Chrono Trigger">
<description>Chrono Trigger</description>
<crc></crc>
<manufacturer></manufacturer>
<year></year>
<genre></genre>
</game>
</menu>

Here is for SNES ini:
[exe info]
path = C:\Emulators\Snes9x\
rompath = C:\Emulators\Snes9x\Roms\
userompath = true
exe = Snes9XW.exe
romextension = zip
parameters =
pcgame = false
pcgameextension =
winstate = NORMAL
hyperlaunch = true

What am I doing wrong??It still just loads to emulator and not the game, help please???

[Dazz]

Is your rom name actually just "Chrono Trigger"?

[Adam1977]

Yes my rom file name is Chrono Trigger
Dont know what else to do, had same problem with Sega Master and ALex Kidd, changed the system XML to rom file name, that seemed to work for sega master but not for SNES??
Checked SNES INI to make sure that is right, I think its ok, on a post above
Is there anything else I should check??
Still going to emulator and not games??

[BadBoyBill]

Whats your emulator log files say?

[Adam1977]

This is what my log says:
12:34:07 PM | HyperSpin Started
12:34:07 PM | Startup Program Unvavailable
12:34:07 PM | Menu mode is multi
12:34:07 PM | Menu.xml found
12:34:07 PM | Entering windowed mode
12:34:08 PM | Main Menu.xml loaded
12:34:08 PM | Loading wheel images
12:34:09 PM | Entering Menu
12:34:19 PM | Menu.xml found
12:34:19 PM | Super Nintendo Entertainment System.xml loaded
12:34:19 PM | Loading wheel images
12:34:20 PM | Entering Menu
12:34:24 PM | Excecutable is Snes9XW.exe
12:34:24 PM | Running in normal rom mode
12:34:24 PM | Executable Found
12:34:24 PM | Rom Found
12:34:24 PM | Attempting to launch
12:34:24 PM | Pausing Animations
12:34:24 PM | Launching file
12:34:24 PM | Command Line is: "C:\Emulators\Snes9x\Snes9XW.exe" "C:\Emulators\Snes9x\Roms\Chrono Trigger.zip"
12:34:47 PM | Menu.xml found
12:34:47 PM | Main Menu.xml loaded
12:34:47 PM | Loading wheel images
12:34:48 PM | Entering Menu
12:34:53 PM | Exiting HyperSpin
12:34:54 PM | Exit Program Unvavailable

How do I change the chrono trigger.zip to just chrono trigger??
I think that what the problem is??

[Goalies Rule]

Do you have any other SNES games to try that are in the same directory? If so, lets try that.

[Adam1977]

Got other SNES roms in same directory, but got nothing else setup on hyperspin wheel, will try to setup another game, and post back soon, thank you for all your help

[Adam1977]

Ok I want to add a game to my Snes games list and launch it so it works can someone please post how to do this step by step. What files do I edit and can use a game example for me, it would be so hopeful. Thank you everyone so far for all there help, I would not got this far and fixed some of the problems that I have had so far, so THANK YOU!!

Still dont know what I am doing wrong with this SNES game Chrono Trigger, still goes to emulate screen, keep checking setting and still cant found anything?? Any ideas anybody please??

[magostin]

shouldnt you be using ZSNESW emulator?

that's what i use.

magostin

[Adam1977]

Got the ZSNES working now Chrono game load thanks for all the help, however still got a few more questions??

1. When I exit Chrono Trigger going to the emulastor (ZSNES) and not hyperspin?? Why is this??

2. Want to put some extra games into SNES wheel, how do I do this and how do I configure it with my roms so that the games will launch?? Example if possible??

Thank You All Once Again!!!

[Adam1977]

Now when I push the esc key while I play Chrono Trigger to exit the game, the menu appears at top of screen, game options etc, instead of exiting the game and returning to hyperspin. Any thoughts?? How to fix??
Still need help with above question 2 as well, would be very helpful??

Thanks to all again

[Adam1977]

Hi Everyone, I've spent all day playing around with hyperspin, trying to get a few things working. Still having a few problems that I just cant seem to figure out;

1.When I load a N64 game, starts to load, screen goes black, starts to emulator then a error windows appears saying ERROR:Attempt to open file failed. I press OK, then goes to the emulator. I can open roms from there, but it should be going to what game I launched from Hyperspin. I tried to setup my own wheel and the extact some error occurs?? Now my rom path in Hyperspin is OK or else it would not start to load. There no errors appears in log and userrompath = true is set. Same error occur when I try to lauch a NES game.It says Sorry, but the file (File name it is looking for) could not be found.How do I fix this help?????

2.When playing ZSNESW game, works ok, problem is when I push ESC to exit game and return to Hyperspin, it goes to the emulator instead of returning to Hyperspin, I have to close emulator down by clicked Game then exit. I cant figure it out?? Help please??

[Goalies Rule]

Ok

1. You're roms are named wrong. They must be named in no-intro format (simple answer). You'll have to try and find no-intro roms online.

2. You need to add hyperlaunch=true under the [exe info]

To add games copy and paste to your SNES.xml

<game name="3 Ninjas Kick Back (USA)"> <-----------change to name of rom
<description>3 Ninjas Kick Back (USA)</description> <----------change to name of game
<crc />
<manufacturer />
<year />
<genre />
</game>

Or search here for dir2xml and it will generate a .xml file that you'll need to rename

[Adam1977]

Thanks for the help,
My other roms loaded on Sega master, mame and neo geo and they are not no- intro roms??
I will have a look tomorrow for no-intro roms.
I have the hyperlaunch = true in my exe
[exe info]
path = C:\Emulators\ZSNES\
rompath = C:\Emulators\Snes9x\Roms\
userompath = true
exe = zsnesw.exe
romextension = zip
parameters =
pcgame = false
pcgameextension =
winstate = HIDDEN
hyperlaunch = true

I will also download the settings ini again and compare them with my ones??
Will post again tomorrow, in mean time, is there any other suggestions to fix these problems, please help??

[Dazz]

In ZSNES you need to go into the options and configure the Exit key and remove the key to bring up the menu.

[Goalies Rule]

You're welcome for the help. Just click the thanks button on the bottom corner of the post when you find peoples posts helpful

Well n64 and nes must be no-intro. Reason is that all of the wheels and themes are done. Since SNES, genesis, etc arent done yet, they dont have to be no-intro. No-intro doesnt apply to MAME, just consoles. However, themes are currently being worked on and will have no-intro naming when they are finished. So its just easier to get no-intro stuff now

[Adam1977]

Thanks for the help, will give it go and post when have done it, thanks
Also tryed to download Hyperspin beta and it download but wont unzip, says there are problems and have to re download, then re download and still the same. Is there a problem with the hyperspin download??Which Hyperspin download has the newer INI files, Hyperspin beta or Hyperspin torrent.
Or could somepost post a copy of there main menu,settings,nintendo64 and NES INI files located in setting folder just so I can check them with mine, yesterday had problem with future pinball,ended up being INI file was all screwwed up, just want to check to make sure I have them right??
Help??

[Dazz]

Honestly, nobody should be downloading that file anymore... It is so out dated compared to newer releases. I have unapproved the beta download file and removed it from the downloads.

[Adam1977]

Hi everybody, spent all day playing around with hyperspin, could use some help to use hyperlaunch correctly??
I a bit confused on how to get hyperlaunch to work properly??I understand that I have to edit the Hyperlaunch.ank file, but I can not figure out where and how. If I wanted to use hyperlaunch to launch Alex Kidd in Miracle World on Sega Master System, where do I edit the file hyperlaunch.ank to configure, so Hyper Launch will launch game, need to get it working so it will help me exit straight back to Hyperspin instead of Fusion when I push escape.I know to make sure the hyperlaunch = true is in setting ini file for what system you want to run. Is there anything else that I am missing to get working properly??Could someone post an example of above for me?? Could someone please help??

Big Thanks by the way to all who have got me this far, could not of done it without all the help, Cheers Adam1977

[Dazz]

Ok, I just setup and tested Sega Master System on my cabinet... This took about 5 minutes for me to setup and test.

When setting up a new emulator I always test the emulator by itself and using no front end or anything else. I then go into the settings of the emulator and set it up to how I need it for my use. I go through each and every setting and then I configure the keys. Once I have everything setup for that emulator I then run a rom and play a couple minutes of the selected game. Once I have everything setup and running like I want it then I change my focus to the front end.

Please note (in my example) that I have not yet converted my Sega Master System to No-Intro yet. No-Intro naming is the official naming convention of HyperSpin and roms should be named using No-Intro or you will need to edit your database files manually. Master System isn't one of my priorities on my cabinet just yet. Once it is then I will go and audit/rename my rom sets to match No-Intro.

Also note that I use the same emulator for Sega Master System, Sega Game Gear, Sega Genesis, Sega 32X and Sega CD. All using the same exact .exe and path. My roms and disk images all have their own folders though.

Here are how my HyperSpin files are setup:

Database:
X:\HyperSpin\Database\Sega Master System\Sega Master System.xml

<game name="Alex Kidd in Miracle World (U) (v1.0)">
<description>Alex Kidd in Miracle World (U) (v1.0)</description>
<crc></crc>
<manufacturer>Sega</manufacturer>
<year></year>
<genre></genre>
</game>

Emulator Settings:
X:\HyperSpin\Settings\Sega Master System.ini

[exe info]
path = Z:\Sega Genesis\Emulator\Fusion\
rompath = Z:\Sega Master System\Roms\
userompath = true
exe = Fusion.exe
romextension = zip
parameters =
searchsubfolders = false
pcgame = false
winstate = HIDDEN
hyperlaunch = true

Other than changing hyperlaunch = true and my path and rompath; I did not change anything else nor did I make any changes to the HyperLaunch files.

This setup works correctly and when ESC is pressed it will exit back to HyperSpin.

Please make sure that you are using the newest version of HyperLaunch and HyperSpin that are located in the Downloads section of this website.

[Adam1977]

Thank you for post your setup, I will test tomorrow and post with reply, thanks for your help cheers.

[Adam1977]

One more thing, do I have the hyperlaunch.exe in the same folder as hyperspin.exe and dont I have to edit the Hyperlaunch.ank file to much my roms??

[Dazz]

One more thing, do I have the hyperlaunch.exe in the same folder as hyperspin.exe and dont I have to edit the Hyperlaunch.ank file to much my roms??Yes, Hyperlaunch needs to be in the same folder as HyperSpin. No, you do not need to edit HyperLaunch. It has nothing to do with your roms, it simply controls how HyperSpin sends the necessary information to the emulator.

The only files that you need to worry about is the Settings and Database files. The Database file for the system in question must be edited to match your rom names. If the database does not match your rom names then HyperSpin will be sending incorrect names to the emulator to be launched. Also in the settings the only part that you really need to focus on is the top area under [exe info]. This area contains the path to your emulator file, your path to your roms, the file type your roms are in and the emulator name.

Don't worry about editing the hyperlaunch.ahk script as that should not be required for Sega Master System and the Fusion emulator.

[Adam1977]

Thanks I will try tomorrow and post then, thanks cheers

[Adam1977]

Hi all, been busy lately, hope back on today to configure my hs, I'm almost there, just having a few problems with a couple of emulators to work, can someone help please??

1. I need to reassign the escape key for the atari 5200 (jum52) and neo pop, so I can exit back to hs, I added the hyperlaunch command but it didnot help??. I cant seemed to find the files or where to do this? Can someone help??

2.How do I change the screensize on the neopop emu so it loads up from start in full screen mode?? When I load up at hs screen blank, can heaar sounds, press esc the see picture in fullscreen??How do I fix??

3. Problem with the Atari Lynx, getting a blank screen and no sound, checked log, and hs not getting past the command line??

Any help with these problems would be great, thank you!!

[Adam1977]

Hi all, I have a question, I would like to buy a new computer just for my games to run on, has anyone got any recommendations for the best performance to run hyperspin on?? Running older games like what hyperspin is setup for.Would like something that is fast. (eg CPU, RAM, Video and Sound Card etc)?? Any suggestions would be great help?? Also can anyone help me with my questions above?? Please help?? Cheers Adam

[portnoy]

Don't know if you fixed the ZSNES to keep it from exiting back to the emu instead of HS but if not, in the ZSNES config file that resides in the actual ZSNES emu folder there is an option for "disable GUI". Change that to = 1. Not sure if you even need to if your using Hyperlaunch.

P

[Adam1977]

Not the ZNES having trouble with, Atari 5200 (Jum52), Neo Pop and Atari Lynx. Need to know how to get the atari 5200 back to hs, not the gui, when nI push escape?? The neo pop, how to change it to full screen mode when it first loads up. Need to know if I can re assign keys in both these emulators so that, when the escape key is pressed, it will take me back to hs and not the emulators?? With the Atari lynx, emu launching from hs, but screen is blank and no sound?? Command line seems to be working?? All work OK outside hs. How can I fix these problems, please help?? Cheers Adam