PDA

View Full Version : MAME Control issues



Grec
01-16-2011, 02:48 PM
Hey guys,
I'm having trouble setting up controls for MAME. P1 Button 1 is mapped oddly. When I press it, I think it's actually pressing two buttons. That's because when I'm playing Marvel Vs Capcom it's doing a super that usually requires two buttons being pressed. In the controls config it is set to that button, so I'm not sure what's going on. Any ideas?

Grec
01-16-2011, 05:29 PM
Problem solved. Two wires got crossed, keystrokes were being registers as two buttons. Is my face red.

psychomike999
11-12-2011, 07:19 PM
I have the same problem with player 2 . Button 3 does not work and button 6 is acting like both 6 and 3. But it's only when i load up the game with hyperspin. HELP!!!

blur
11-13-2011, 12:05 AM
when i first connected wires for my hacked ps2 gamepad - all of my buttons did not work except button 6
it took me a while to find out what's going on, at first i thought damn i fried the pad
then i tried connecting all wires together and all buttons were on - huh so all buttons are working after all, just have to find where are their wires
after a bit of thinking - i came up to conclusion that i switched button 6 and ground, and after changing it back all was ok

psycho - check q & s threads, disable exitemulatorkey or change it to ~q & ~s or to some keys you don't use on your control panel