Mame & LED-Blinky Issue

[cbronner]

Since I've set up my RGB LED system I've been having a small issue while playing MAME. All the LEDs light up perfectly while playing but when I push the pause button all the lights turn off. I have to get out of MAME and return to Hyperspin just to get the LEDs back on. As you can see this can get quite annoying especially when you play your cab in the dark. This problem is most likely related to LED-Blinky's Pause Game Animation for MAME but I have this disabled. Anyone out there have any suggestions for fixing this??

[arzoo]

Do you have the "Speak and Blink Controls On Game Pause" option checked? If so, try unchecking and see if that solves the problem.

[cbronner]

I tried that but the issue still remains... It's sooo strange because when I "unpause" my lights don't come back on until I return to Hyperspin

[arzoo]

If you have the "Flash Player Start with Credits" option checked - try turning that one off also. With both the Speak and Blink Controls on Pause and the Flash Player Start with Credits options turned off, LEDBlinky should not use any MAME outputs - and that's the only way it communicates with MAME.

[arzoo]

Couple other questions - are you using a Game Pause Animation or u360 mapping? If so, try turning those options off also and check if the problem goes away.