magostin
04-07-2009, 06:29 PM
help!
i have 2 monitors, wizard controller set up on my kitchen table for a week now...
ive been doing tests with monitor resolutions,and table test with both visual and future pin.
ive been using my laptop to run everything, i knew it would be choppy but it was just testing stuff out.running pf in 1920x1080 and bglass 1024x768
my laptop has hdmi out,vga out
2.0 dual intel core
3 gig ram
nvidia 8400gt card 256 mb
vist 32bit
so its pretty good laptop, but it got alot crap also running in the bkground cause its a laptop right?
so after work today i bought my dedicated pc for my inconstruction cab, heres the specs:
2.66 dual intel core
4 gigs ram
nividia g100 512mb (this is oem similar to 9400gt series, it factory with pc)
vista 64bit
so i just setup the pc and removed virus stuff and firewall crap
did the same resolution:running pf in 1920x1080 and bglass 1024x768
and the result is a little less then my laptop.
i havent looked for any updated drivers for the nvidia card,that will be my next step...
SO, MY QUESTION IS:
TO RUN FUTURE PINBALL IN MAXED OUT SETTINGS (EXCEPT GAMEROOM RENDER)
WHAT KIND OF SPECS DOES YOUR PC HAVE TO RUN IT AT ALMOST FULL SPEED OR FULL SPEED?
ps. i didnt update vist 64bit, i thought i shouldnt because it was dedictated to the pincab, do you think i might need to?
any recomendations would be great!
thx, magostin
i have 2 monitors, wizard controller set up on my kitchen table for a week now...
ive been doing tests with monitor resolutions,and table test with both visual and future pin.
ive been using my laptop to run everything, i knew it would be choppy but it was just testing stuff out.running pf in 1920x1080 and bglass 1024x768
my laptop has hdmi out,vga out
2.0 dual intel core
3 gig ram
nvidia 8400gt card 256 mb
vist 32bit
so its pretty good laptop, but it got alot crap also running in the bkground cause its a laptop right?
so after work today i bought my dedicated pc for my inconstruction cab, heres the specs:
2.66 dual intel core
4 gigs ram
nividia g100 512mb (this is oem similar to 9400gt series, it factory with pc)
vista 64bit
so i just setup the pc and removed virus stuff and firewall crap
did the same resolution:running pf in 1920x1080 and bglass 1024x768
and the result is a little less then my laptop.
i havent looked for any updated drivers for the nvidia card,that will be my next step...
SO, MY QUESTION IS:
TO RUN FUTURE PINBALL IN MAXED OUT SETTINGS (EXCEPT GAMEROOM RENDER)
WHAT KIND OF SPECS DOES YOUR PC HAVE TO RUN IT AT ALMOST FULL SPEED OR FULL SPEED?
ps. i didnt update vist 64bit, i thought i shouldnt because it was dedictated to the pincab, do you think i might need to?
any recomendations would be great!
thx, magostin