View Full Version : Pinball Cab Legs?
kingb33
05-07-2009, 02:28 AM
I wasn't sure where to ask this, you guys can move or delete it after if you want.
I'm was curious, can you but pinball table legs anywhere? Like Home Depot or any hardware? Or are they "specifically" pinball parts that you have to order off the internet?
devospeed
05-07-2009, 05:22 AM
I bought a set of 4 chrome legs off of Ebay for $59 shipped. You will not find real pinball legs at Home Depot or a hardware store. You could however buy some angled metal as a substitute! Another good place to buy pinball legs is http://www.pinballlife.com I purchased my leg bolts and leg supports for the inside of the cabinet there. They are a reputable vendor!
Cameron
05-07-2009, 05:59 AM
Yeah pinballlife, Marco specialties and Bay area amusements carry them. Oh yeah Action Pinball does also. You can't get them at HD. Can't get the right leg bolts there either.
kingb33
05-07-2009, 09:34 AM
k thx guys!
studmuff
05-07-2009, 09:45 AM
Pinballlife is great! I buy most of my pinball stuff ther king.
kingb33
05-07-2009, 09:53 AM
hey guys where can i find the measurements of pinball tables? I need to know the height of a pinball table like if you are standing in front of table looking at the the playfield. How high should the playfield be? Is the LCD monitor completely laid down flat? Or is it at a slight angle at all? That the top of the LCD is titling slightly towards you?
thx
Chappie
05-07-2009, 03:49 PM
A regular pinball machine runs right at 37" tall in the front. I opted to angle my LCD parallel with the side rails and as such is leaning at a 12 degree angle. A regular pinball runs at about 14 degrees when measured on top of the glass. I think a horizontal to the floor mounted LCD looks funny and certainly looks nothing like a regular pinball machine. My opinion.