View Full Version : How can i split DMD for right fit backglass?
rossicomputers
06-07-2009, 04:29 PM
Tables like meteor, superman,Kiss...i'd like to use the score separated instead all together...
In VP9, [DMD are 4 score all together plus ball and credit..
How can i split this in score 1, score2, .... Balls and Credits... all apart...
Can i do it?
To fit right on the backglass like this picture:
IMG]http://www.imged.net/66/kiss_t.jpg (http://www.imged.net/66/kiss.jpg)[/IMG]
Any help welcome...
bossgp
06-07-2009, 04:43 PM
mate I asked that question like a short while ago and got no answers, I played around for ages trying to do it by myself and just settled for the way it is so I blacked out all the scores in the backglass and put the DMD in the DMD slot in my machine.
studmuff
06-07-2009, 05:12 PM
The only way I have seen it done is the method used for spanning for 16:9. You have to put all the individual lights on the playfield along with the backglass. I do not think there is any way to seperate the displays in pinmame. You might want to ask over at vpf.org but I don't believe it is possible.
unclewilly
06-07-2009, 06:35 PM
you can't. one downside to not spanning.
or you could set up spanning (good luck) and use a different front end, and be limited to the 16:9 releases at vp forums which are kind of at a stand still, and in my opinion, don't look the greatest.
having the static backglass is ok for me, but I mostly play 80 and 90 pins in vp, the older ones I usually play in fp.
bossgp
06-07-2009, 11:16 PM
This is how my KISS looks using VP and the DMD best I could get it and this is my only solution for older games like it, Rolling Stones, Dolly etc. Sure would be nice if it was in the correct place but it can't go there unless you use 16.9 spanning.I really do like the latest VP version of Kiss to the FP version.