Pinball machine cabinet cad drawing

[bossgp]

Well here goes just asking to see if anyone has what I want.
I am thinking about producing some pinball cabinets for people who would like to build their own pin cab don't get too excited this is just for Australian people only, so I want to base them on late model "Bally, Williams, Stern Or Alvin G " type design, of course I'll change it some what to fit the LCD'S and other parts.
But all the cabinet companies want the design on CAD, with sizes etc so they can give me quotes, so does anyone here have any measurements or CAD design for a real full size pinball cabinet so I can give this to the cabinet makers ???
Otherwise I'll need to spend so much time just to measure everything and I want this to be a sort of universal design but based on real cabinets in the market.Anyone please ...

[xzotic]

Well here goes just asking to see if anyone has what I want.
I am thinking about producing some pinball cabinets for people who would like to build their own pin cab don't get too excited this is just for Australian people only, so I want to base them on late model "Bally, Williams, Stern Or Alvin G " type design, of course I'll change it some what to fit the LCD'S and other parts.
But all the cabinet companies want the design on CAD, with sizes etc so they can give me quotes, so does anyone here have any measurements or CAD design for a real full size pinball cabinet so I can give this to the cabinet makers ???
Otherwise I'll need to spend so much time just to measure everything and I want this to be a sort of universal design but based on real cabinets in the market.Anyone please ...

Hey great idea. Is there anyone out there that can give me all their hard work so I can farm it off to some other guys to produce and then I can make some fast bucks at everyone elses expense without "spending so much time".

Sorry, but come on....at least phrase your question better so its not so obvious...

[bossgp]

Ok sorry but you got it all wrong , I just thought " hey someone else might have already gone to the trouble of doing this, but not got them made because of the costs involved" or someone might have a cad drawing of one of those companies cabinets.never mind I can work with my own cabinets size and move on from there.
There is no need to jump on me man I was just asking a question.

[Drummy]

Don’t know if the attached would help you. (first stages of my planning!) I put together an autocad 2000 drawing. Measurements might not be spot on, so please don’t take them as gospel. I haven’t put any dimensions on the drawing and all measurements are in mm. I don’t have position or dimensions for the plunger. Saved it in dxf format (80KB). Cheers Drummy

re-upped
New Pinball cabinet DXF (http://www.meadowridgeafc.co.za/docs/pinball_cab.zip)