Measurements of a Standard Lockdown Bar?

[lagwag0n]

Anyone know the measurements of a standard lockdown bar? I purchased one from pinballlife.com but it doesn't get here until weds. I want to build the width out before it gets here so I need to find out the length ahead of time. Anyone have this information of maybe even a measurement for me on their width for their standard lockbar?

http://www.pinballlife.com/index.php?p=product&id=1369&parent=210

[tagi3d]

roughly 22 inch... (though I'm not sure if standards can vary slightly.

Just measured mine and it's 22 3/8 inches from inside edge to edge. (approx 567-569mm).

Mine looks the same as yours but you wouldn't want to get something like the width wrong! Good luck.

[analog999]

A buddy of mine gave me his old one off of his funhouse. Measuring mine I get 22 3/16" You might want to double check your measurements tagi3d? 3/8" is pretty big difference from my measurement.

I also was given a widebody williams 23.75" and a very old widebody stern 29" (wow can you think of the monitor that could go into that game??)

[lagwag0n]

Thanks guys for your feedback. I am going to plow forward and hope for the best. :)

I guess worst case I would have to redo the front and back panel.

[tagi3d]

A buddy of mine gave me his old one off of his funhouse. Measuring mine I get 22 3/16" You might want to double check your measurements tagi3d? 3/8" is pretty big difference from my measurement.


I just remeasured to be sure - and this is 568mm exactly (from inner edge to inner edge)... Brand new lock bar, hasn't even been installed yet.
That's actually only a difference of 3/16 of an inch. Which to me is minimal considering the edges can be bent slightly in on a lock bar. haha - now you might want to recheck your measurements? :P

Anyway ctalavera - I'd go the narrower measurement to be safe! (i.e narrower cab)

[Ace9567]

In search of lockdown bar {25"}
anyone know where I can find this size ?

[colonelsnow]

In search of lockdown bar {25"}
anyone know where I can find this size ?

Have have tried Marco?