VaderPin - 37/24/22 p2k build

**zoltar420** · 04-27-2012, 04:42 PM

Originally Posted by mameman

Steer clear of the se model

OK thx for the info!

**BladeZX** · 04-28-2012, 12:19 PM

Would it be worth it to upgrade the GTX460 Superclocked to a GTX560 superclocked for an extra $50?
Or will the GTX460 SC be all that will ever be needed?

**BladeZX** · 04-28-2012, 01:50 PM

Is a 80GB SSD enough space?
Thinking of if Windows 7 because it uses more space for the OS
Is it worth a 120GB for an extra $44

**shifters67** · 04-29-2012, 01:57 AM

Hi Blade,

i have 60GB SSD with windows 7, hyperpin installed and less than half of it is used - I have however got a mechanical as second drive for swap etc

Shifters

**BladeZX** · 04-29-2012, 06:34 AM

Thanks. I will be using XP so the OS will use less space but I was thinking of future. Just want to make sure I have enough. Was not sure how much each table took up.

**evil eye** · 04-29-2012, 07:29 AM

Originally Posted by mameman

Steer clear of the se model

Hey Greg, just out if curiosity, why do you say that? Is there a preferred manufacturer for the GTX 460?

**mameman** · 04-29-2012, 09:19 AM

Originally Posted by evil eye

Hey Greg, just out if curiosity, why do you say that? Is there a preferred manufacturer for the GTX 460?

Evga is my preferred supplier.
The se is a stripped down version, and does not support the Older driver we tend to run.

**BladeZX** · 04-29-2012, 10:22 AM

I will be using the data east coin door on the cabinet (http://www.pinballlife.com/index.php...d=628&parent=8)
What service buttons kits do I need to buy that will fit the data east coin door so I can use the 7,8,9 and 0 service buttons?
I also want to be able to have a switch on the door so that when it is opened the rom goes into service mode.
What do I need to purchase to go with my data east coin door?
Thx

**mameman** · 04-29-2012, 01:18 PM

Pinballlife answer said has the service button set, don't think there is a bespoke 1 for data east, case of making it fit. For the other item, you need the coin door interleave bracket and switch they sell also.

As I said on the phone, personally would not bother, once you set the rom if you need to set it at all when you set the game up, hardly ever touch it again.

Also using a switch to trigger end when you open the coindoor can be problemattic as its designed that you press end once, a nc/no switch means its pressed the entire time the door is open, seen that cause issues in the past.