Glad you got it working.
I have the LED-Wiz+GP as well.
However I have mine wired completely differently:
Code:
Input - Joy2Key Encoder - Action in HP
---------------------------------------------------------
17 - Start (1) - Does Nothing
18 - Extra Ball (2) - Spins wheel to the right
19 - Launch (Enter) - Spins wheel to the right
20 - Not Connected
21 - Left Flipper (LShift) - Instruction Card
22 - Right Flipper (RShift) - Does Nothing
23 - Left Nudge (z) - Brings up Genre Menu
24 - Right Nudge (/) - Exit
25 - Service/Esc (7) - Does Nothing
26 - Volume - (8) - Spins wheel left
27 - Volume + (9) - Spins wheel left
28 - Enter / Begin Test (0) - Does Nothing
I disabled the gamepad emulator and the keyboard is working just fine (as it is with the emulator turned on)
I started looking at the HP Settings.ini file.
Changed the Joy = 0 to Joy = 1 - Figuring that this would point HP to use the 2nd Gamepad (which isn't connected)
This works flawlessly - none of the keys do anything in HyperPin!
Then I re-enable Joy2Key to enable the gamepad emulation.
And it's completely different.
Now both flippers and the left nudge spin the wheel right while the right nudge spins it left.
This does not make any sense at all to me.
Any ideas out there?
Hybrid Mode
