badhemi Posted May 22, 2016 Share Posted May 22, 2016 My badlands game starts and runs but I can't control anything and it goes right into the death scene.then starts the next scene Link to comment Share on other sites More sharing options...
Metalzoic Posted May 22, 2016 Share Posted May 22, 2016 What systems is it for? Link to comment Share on other sites More sharing options...
Metalzoic Posted May 22, 2016 Share Posted May 22, 2016 If you mean the Atari/MAME game I just tried it and it works fine on mine (MAME 172). However it uses it's own control setup. Didn't mess with it much but it may need wheel/pedal to actually play. Link to comment Share on other sites More sharing options...
badhemi Posted May 23, 2016 Author Share Posted May 23, 2016 I'm sorry guys it's for daphne Link to comment Share on other sites More sharing options...
Metalzoic Posted May 23, 2016 Share Posted May 23, 2016 Ah, then you just don't have the correct combination of options set. Can't remember what it is, but I remember there's one specific combination action that works. If I remember right you have to have the correct sound (emulated or samples) selected or it crashes Sent from my SM-G935V Link to comment Share on other sites More sharing options...
badhemi Posted May 23, 2016 Author Share Posted May 23, 2016 Ah, then you just don't have the correct combination of options set. Can't remember what it is, but I remember there's one specific combination action that works. If I remember right you have to have the correct sound (emulated or samples) selected or it crashes Sent from my SM-G935V if you get time and think of it let me know. Thank you Link to comment Share on other sites More sharing options...
Metalzoic Posted May 23, 2016 Share Posted May 23, 2016 I think that's it. You just need to change your sound options and then try it with each of the other options until it works. Link to comment Share on other sites More sharing options...
badhemi Posted May 23, 2016 Author Share Posted May 23, 2016 I think that's it. You just need to change your sound options and then try it with each of the other options until it works.not sure on how to go about doing that. Thanks Link to comment Share on other sites More sharing options...
Metalzoic Posted May 23, 2016 Share Posted May 23, 2016 Same settings in the RL module that you use to set up all the Daphne games. Sent from my SM-G935V Link to comment Share on other sites More sharing options...
badhemi Posted May 24, 2016 Author Share Posted May 24, 2016 Same settings in the RL module that you use to set up all the Daphne games. Sent from my SM-G935V thanks I'll try to figure it out. I got this already configured and never messed with rocket launcher. I just got it to convert as many systems to Android for my nvidia shield console. Link to comment Share on other sites More sharing options...
Metalzoic Posted May 24, 2016 Share Posted May 24, 2016 Oh this is for Android? I'm not sure in that case. I believe in the RL module settings there are places to change the different plugins etc... If I remember right I just had to go through a few combos of that to get it working. Even at its best Badlands doesn't work great though. And I believe having it set to original sound makes it crash, switching it to samples gets you on the road to it working right... Unless I have that backwards. Link to comment Share on other sites More sharing options...
badhemi Posted May 24, 2016 Author Share Posted May 24, 2016 Oh this is for Android? I'm not sure in that case. I believe in the RL module settings there are places to change the different plugins etc... If I remember right I just had to go through a few combos of that to get it working. Even at its best Badlands doesn't work great though. And I believe having it set to original sound makes it crash, switching it to samples gets you on the road to it working right... Unless I have that backwards. no this is for pc. I'm waiting for emulator. Badlands runs perfect thru daphneloader but skips and crashes thru hyperspin. No coin sound and it skips scenes and stutters. All my other daphne games run perfect thru hyperspin. What gives? Thanks Link to comment Share on other sites More sharing options...
Metalzoic Posted May 24, 2016 Share Posted May 24, 2016 no this is for pc. I'm waiting for emulator. Badlands runs perfect thru daphneloader but skips and crashes thru hyperspin. No coin sound and it skips scenes and stutters. All my other daphne games run perfect thru hyperspin. What gives? Thanks If you have it working fine in Daphne then just use those same settings in RocketLauncher. You have to set your settings in RL manually, it doesn't automatically use your Daphne settings. (if I remember right) Link to comment Share on other sites More sharing options...
badhemi Posted May 24, 2016 Author Share Posted May 24, 2016 If you have it working fine in Daphne then just use those same settings in RocketLauncher. You have to set your settings in RL manually, it doesn't automatically use your Daphne settings. (if I remember right) I opened rocket launcher and don't know how to set the settings for badlands. Link to comment Share on other sites More sharing options...
Metalzoic Posted May 24, 2016 Share Posted May 24, 2016 I opened rocket launcher and don't know how to set the settings for badlands. Should just be in the module settings like most systems. Link to comment Share on other sites More sharing options...
badhemi Posted May 24, 2016 Author Share Posted May 24, 2016 Cool I'll try and give it a go Link to comment Share on other sites More sharing options...
Metalzoic Posted May 24, 2016 Share Posted May 24, 2016 Looks like there aren't as many options in the module settings as I remembered, maybe some of the Daphne settings do carry over then? My Global Parameters are vldp -blank_searches -noissues -fastboot here's my badlands settings. It says I'm running Badlands prototype... maybe that's what I was thinking when I was talking about the sound option? My new advice is ask Ron in the Daphne tutorial thread. He'll probably know. Link to comment Share on other sites More sharing options...
wesfranks Posted May 24, 2016 Share Posted May 24, 2016 Usually, controls are setup in DaphneLoader. This populates the "dapinput.ini" file which can be interesting to edit manually. The only other information that must be obtained from DaphneLoader is the memory bank settings for each game and that can be transferred to RocketLauncher for compatibility. I have my bank settings saved in a txt file so I don't have to mess with DaphneLoader as it can do crazy things like locking your roms files from use and rewriting your game media files without warning while rejoining the torrents. Everything else is done through command line switches. Link to comment Share on other sites More sharing options...
badhemi Posted May 24, 2016 Author Share Posted May 24, 2016 Usually, controls are setup in DaphneLoader. This populates the "dapinput.ini" file which can be interesting to edit manually. The only other information that must be obtained from DaphneLoader is the memory bank settings for each game and that can be transferred to RocketLauncher for compatibility. I have my bank settings saved in a txt file so I don't have to mess with DaphneLoader as it can do crazy things like locking your roms files from use and rewriting your game media files without warning while rejoining the torrents. Everything else is done through command line switches. why does my badlands run perfect in daphne loader but not thru hyperspin? Link to comment Share on other sites More sharing options...
badhemi Posted May 24, 2016 Author Share Posted May 24, 2016 Looks like there aren't as many options in the module settings as I remembered, maybe some of the Daphne settings do carry over then? My Global Parameters are vldp -blank_searches -noissues -fastboot here's my badlands settings. It says I'm running Badlands prototype... maybe that's what I was thinking when I was talking about the sound option?My new advice is ask Ron in the Daphne tutorial thread. He'll probably know. Capture.PNG Thanks I'll check mine out Link to comment Share on other sites More sharing options...
badhemi Posted May 24, 2016 Author Share Posted May 24, 2016 Looks like there aren't as many options in the module settings as I remembered, maybe some of the Daphne settings do carry over then? My Global Parameters are vldp -blank_searches -noissues -fastboot here's my badlands settings. It says I'm running Badlands prototype... maybe that's what I was thinking when I was talking about the sound option? My new advice is ask Ron in the Daphne tutorial thread. He'll probably know. Capture.PNG # pauseOnExit - If true, will pause Daphne before exiting by sending "P". If your monitor is not the same resolution as daphne, Fade_Out will not display correctly. Pausing Daphne tries to prevent this. # -noissues is for Esh's Aurunmilla. It stops daphne's warning about issues at launch. # -fastboot is for Dragon's Lair and Space Ace, It skips the self test in the beginning. # version - see version info below each game [settings] globalParams = vldp -blank_searches -prefer_samples -fullscreen -noissues -opengl -fastboot -x 1024 -y 768 pauseOnExit = false [ace] min_seek_delay = 1000 seek_frames_per_ms = 20 homedir = . bank0 = 00000010 bank1 = 00000001 bank2 = bank3 = sound_buffer = 2048 params = -useoverlaysb 1 version =ace # Rev A3 = ace # Enhanced v1.0 = sae # Rev A2 = ace_a2 # Rev A = ace_a [astron] min_seek_delay = seek_frames_per_ms = 20 homedir = . bank0 = 00000000 bank1 = 00000000 bank2 = bank3 = sound_buffer = 2048 params = version = astron # Astron Belt (Hitachi) = astron # Astron Belt (Pioneer) = astronp [badlands] min_seek_delay = 1000 seek_frames_per_ms = 20 homedir = . bank0 = 00000000 bank1 = 10000011 bank2 = bank3 = sound_buffer = 2048 params = version = badlands # Standard = badlands # Prototype = badlandp [bega] min_seek_delay = 1000 seek_frames_per_ms = 20 homedir = . bank0 = 00000000 bank1 = 00000111 bank2 = bank3 = sound_buffer = 2048 params = version = bega # Revision 3 = bega # Revision 1 = begar1 [cliff] min_seek_delay = 1000 seek_frames_per_ms = 20 homedir = . bank0 = 00000000 bank1 = 01000000 bank2 = 00000000 bank3 = 01111011 sound_buffer = 2048 params = version = cliff # Standard = cliff # Alternate #1 = cliffalt [cobra] min_seek_delay = seek_frames_per_ms = 20 homedir = . bank0 = 00000000 bank1 = 01001000 bank2 = bank3 = sound_buffer = 2048 params = version = cobraab # Astron Belt Hardware = cobraab # MACH 3 Hardware = cobram3 # Dedicated / Bega's Battle Hardware = cobra # Cliff Hanger / Interstellar / Dragon's Lair Conversion = cobraconv [esh] min_seek_delay = seek_frames_per_ms = 20 homedir = . bank0 = bank1 = bank2 = bank3 = sound_buffer = 2048 params = version = esh # Standard = esh # Alternate #1 = eshalt # Alternate #2 = eshalt2 [galaxyr] min_seek_delay = seek_frames_per_ms = 20 homedir = . bank0 = 00000000 bank1 = 00000000 bank2 = bank3 = sound_buffer = 2048 params = version = galaxy # Hitachi = galaxy # Pioneer = galaxyp # Star Blazer = blazer [gpworld] min_seek_delay = seek_frames_per_ms = 20 homedir = . bank0 = bank1 = bank2 = bank3 = sound_buffer = 2048 params = version = gpworld # Standard = gpworld [interstellar] min_seek_delay = 1000 seek_frames_per_ms = 20 homedir = . bank0 = 00110001 bank1 = 00000000 bank2 = bank3 = sound_buffer = 2048 params = version = interstellar # Standard = interstellar [lair] min_seek_delay = 1000 seek_frames_per_ms = 20 homedir = . bank0 = 11011001 bank1 = 00100111 bank2 = bank3 = sound_buffer = 2048 params = -useoverlaysb 1 version = lair # Rev F2 = lair # Enhancement v2.1 = dle21 # Enhancement v1.1 = dle11 # Rev F = lair_f # Rev E = lair_e # Rev D = lair_d # Rev C = lair_c # Rev B = lair_b # Rev A = lair_a # Beta 2 = lair_x # Beta 1 (serial #1) = lair_n1 [lair2] min_seek_delay = seek_frames_per_ms = 20 homedir = . bank0 = bank1 = bank2 = bank3 = sound_buffer = 2048 params = version = lair2 # Version 3.19 = lair2 # Version 3.19 (European) = lair2_319_euro # Version 3.19 (Spanish) = lair2_318 # Version 3.18 = lair2_318 # Version 3.16 (European) = lair2_316_euro # Version 3.15 = lair2_315 # Version 3.14 = lair2_314 # Version 3.00 = lair2_300 [mach3] min_seek_delay = 1000 seek_frames_per_ms = 20 homedir = . bank0 = 01000100 bank1 = bank2 = bank3 = sound_buffer = 2048 params = version = mach3 # Standard = mach3 [rb] min_seek_delay = 1000 seek_frames_per_ms = 20 homedir = . bank0 = 00000000 bank1 = 00000001 bank2 = bank3 = sound_buffer = 2048 params = version = roadblaster # Standard = roadblaster [sdq] min_seek_delay = 1000 seek_frames_per_ms = 20 homedir = . bank0 = 00100001 bank1 = 00000000 bank2 = bank3 = sound_buffer = 2048 params = version = sdq # Standard = sdq # Shortened Scenes = sdqshort # Shortened Scenes, Alternate = sdqshortalt [tq] min_seek_delay = seek_frames_per_ms = 20 homedir = . bank0 = bank1 = bank2 = bank3 = sound_buffer = 2048 params = -useoverlaysb 1 params = version = tq # Standard = tq # Alternate = tq_alt # 'Swearing' ROM Hack = tq_swear [uvt] min_seek_delay = seek_frames_per_ms = 20 homedir = . bank0 = 00000000 bank1 = bank2 = bank3 = sound_buffer = 2048 params = version = uvt # Standard = uvt Link to comment Share on other sites More sharing options...
badhemi Posted May 28, 2016 Author Share Posted May 28, 2016 Help???? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.