Jump to content
Unfortunately we had to take download section back offline temporarily. We should have it working normally soon.

JPAC connection issues


BBBrennaNNN

Recommended Posts

I have been working on my setup for quite some time and my jpac has just arrived. previously my jamma is connected to a pcb while i am trying to connect it to a cpu which runs my hyperspin. 

 

jpac_zpsxrzhfiv2.jpg

 

the blue wire im holding is the usb cable that connects to the cpu. the monitor and sound system are all powered by the cpu. the jamma connector/jamma is only giving me access to the joystick/buttons. the jamma is powered seperately by another power supply (yellow/red wires on top).

am i doing anything wrong or do i have to install any joystick software device. when i plug in the cpu it detects that it is a joystick however i am unable to calibrate or use the joystick for any function.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...